Storage and Seating
|
 |
| Bow Dodger/Bag Kit |
| Water-repellent, dark blue Cordura® nylon bag closes with a non-corrosive nylon zipper and hangs under the dodger. Easy to attach. |
 |
| Under-Seat Storage Bag |
| Fits all Quicksilver Inflatables except 200 and 240 models. Handsome, colour-co-ordinated storage bag of water-repellent, dark blue Cordura Nylon. Durable construction for long life. |
 |
| Adjustable Storage Seat with Cushion |
| 25cm x H x 46cm D x 69cm to 84cm W padded storage seat easily adjusts for use on 240 to 340 models. Easy to install and remove. |
 |
| Inflatable Thwart Seat |
| Roll-Up, Sport, AirDeck 230 to 260 |
| Sport, AirDeck 270 to 340 |
| Heavy-Duty 380 |
| Grey in colour, there's an inflatable thwart seat to fit every Quicksilver Inflatable model except the 430. |
 |
| White Vinyl Seat Cushion |
| Model 230, 240 and 260 76cm |
| Model 270 - 340 86cm |
| Model 380 102cm |
| Model 430 112cm |
|
Air Pumps
|
 |
| Bravo 220/280 Automatic Inflator/Deflator |
| Features an automatic shut-off when pressure reaches 200mb, with manual override for additional pressure if needed. 220 volt. |
 |
| Halkey-Roberts Valve Fill Adapter |
| For hose diameter 19mm |
| For hose diameter 14mm |
| Fits old style valve |
|
| For hose diameter 19mm (New style valve) |
| Universal Fill Adapter |
| For hose diameter 14mm |
| Fits old and new style valve |
 |
| Bravo 6 Double-Action Air Pump |
| This easy-to-use, double-action hand pump is much faster than a standard foot pump. Use either single action (pumps when pushing) or double action (pumps on both the pull and the push) |
 |
| Bravo 12v Automatic Inflator/Deflator |
| Works off your car's battery to provide up to 300 mb pressure. Auto shutoff prevents over-pressure. Supplied complete with universal adapters including valve and battery connectors. Makes inflating your boat a breeze on the beach. |
|
Fuel Tank
|
 |
| Fuel Tank Hold Down Kit |
| Made with polypropylene strapping for superior strength and appearance. Quick-release buckles simplify replacement of container. |
|
Lighting
|
 |
| Attwood Clamp-On Stern Light |
| This 61cm-high all-round light is designed for inflatables and other small craft that do not have permanently mounted navigation lights. |
 |
| Attwood Combination Bow Light with Attachment Base For Inflatables |
| Battery-operated bow light designed for inflatables or other surfaces where screws cannot be used. |
|
Mooring
|
 |
| Inflatable Boat Anchor |
| Designed specifically for safe and easy use with infltable boats. A mushroom anchor in a choice of three weights, coated in black plastisol. |
| 3.6Kg Models 200-270 |
| 4.5Kg Mopdels 300-340 |
| 6.8Kg Models 380-430 |
 |
| Anchor Line |
| Three-strand polyester with thimble (40m) 10mm |
| Three-strand polyester with thimble (40m) 12mm |
Covers
|
|
| Boat Cover |
| Model 200, 230 |
| Model 240, 260, 270 |
| Model 300, 310, 330 |
| Model 340 |
| Model 380 |
| Model 430 |
| Rip-stop nylon with UV inhibitors and water-repellent ZEPEL® finish protects your inflatable from sun, rain and debris. Also fits over attached engine. |
|
Engine
|
  |
| Spray Deflector |
| Spray deflector helps prevent engine spray from entering boat. Easy to install. |
 |
| Easilift® Motortote |
| Provides a removable, secure handle for raising and lowering an outboard engine. Can be left in place permanently. Fits outboard motors up to 15 H.P. |
 |
| Hydrofoil Stabilizer Kit |
| For Mercury®, Mariner® 6 h.p to 25 h.p engines. Designed to enhance performance - quicker planing, better acceleration. |
|
Trailering
|
 |
| Wellington Puritan Boat Trailer Tie Down |
| 3.05M-long, 5cm-wide webbing with the strength, but not the stretch, of nylon. Helps prevent strap loosening while trailering. |
 |
| Dinghy Dolly Launching Wheels |
| For all Quicksilver series models. Wheels roll easily over firm surfaces, and tuck out of the way once boat is in water. |
 |
| Raft Runner Launching Wheels |
| For all models except Rhino® Series. Wheels roll easily over firm surfaces, and tuck out of the way once boat is in water. Will not rust, corrode or deteriorate. |
|
Repair Accessories
|
 |
| Boat Handles |
| (a) Grey |
| (b) Black |
| (c) Grey |
| Additional handles make lifting easier. Mount them anywhere on the boat for convenient handholds. New model handle (c) doubles as a cleat. |
 |
| Combination D-Ring and Lifting Handle |
| Backed by rugged 1100 decitex denier fabric. Ideal for any inflatable boat. |
 |
| Stainless Steel Rings |
| Small black |
| Large black |
| Large Grey |
| These stainless steel rings can be added to inflatables for petrol-tank-tie-downs, lifting rings and securing gear. |
 |
| Moulded Rope Holder |
| Black |
| Grey |
| Backed by rugged 1100 decitex denier fabric. Ideal for any inflatable boat. |
|
| PVC Repair Kit |
| Contains two grey fabric patches and one tube of cement in a waterproof plastic canister. |
|
 |
| Seat Webbing |
| Web Grey - Fabric Silver |
| Web Grey - Fabric Grey |
| Web Grey - Fabric White |
| Web Black - Fabric Red |
| Used to attach additional wooden seats to tubes (two required) |
|
| M.E.K Patching Solvent and Cleaner |
| Used to clean inflatable tubes prior to using 2-part glue. |
|
| 2-Part Glue |
| Sizes available: |
| 118ml |
| 236ml |
| 473ml |
| 946ml |
| Used to attach handles and larger accessories to inflatable boat tubes. For use on PVC and Hypalon fabric. |
|
 |
| Seam Grip™, 1oz. Tube |
| Excellent for minor seam or small puncture repairs. Seals and repairs in one application, dries overnight. |
 |
| AquaSeal®, 1oz. Tube |
| Thicker than Seam Grip. Repairs small tears and cuts in inflatable boat fabrics such as PVC, Hypalon and more. Dries overnight. |
 |
| Seam Grip Combo Pack |
| Seams seal in two hours using the combination of Seam Grip and Seam Excel™ (tack-free in 15 minutes for fast repairs) |
 |
| AquaSeal Combo Pack |
| The combination of AquaSeal and Cotol-240™ means repairs will be dry in two hours (tack-free in 15 minutes) |
 |
AirDeck Floors and Thrust Boards
|
| Add the benefits of an AirDeck to an existing Quicksilver Series Inflatable. Airdeck as a replacement floor is available for models 230 (for 1996 models and later) to the 340. When an AirDeck is ordered as an accessory to replace wooden floorboards in an existing boat, two additional items much be purchased: 1) a double-Action Air Pump and 2.) a Thrust Board. The Thrust Board is placed under the floor to prevent the inflatable keel from pushing up under the floor. |
|
| Accessory AirDecks and Thrust Boards are available for the following models:- |
| 230 |
| 270 |
| 300 |
| 330 |
| 330 Euro |
|
Letter and Numbering Kits
|
 |
| Plastic Registration Panels |
| 8cm H x 61cm W panels fit into slotted rubstrake of 1998 inflatables to display registration or boat name. |
 |
| Hardline 76mm Letter and Number Registration Kits |
| Pink with purple outline gradation |
| Yellow with red outline gradation |
| Get a custom look with freehand brush styling, in either solid or sold with gradation designs. |
 |
| Stencil Kit |
| Includes 76mm numbers and letters, surface preparation solution and black aerosol vinyl coat. |
|
Steering
|
 |
| A. Pedestal Rotary Steering Kit |
| This floor-mounted pedestal steering unit is made of rugged stainless steel tube construction. Kit includes pedestal frame, 33cm steering wheel, bezel, rotary helm, steering cable and attaching hardware (four T-nuts, bolts and washers). Does not include control box, shift and throttle cables or attaching kits for engine. |
| Various lengths available |
|
| B. Spare Steering Wheel |
| Soft grip polyurethane steering wheel. |
|
| C. Bench Seat - White Vinyl with Attaching Hardware |
| 66cm wide fold-back cushion seat with aluminium base and attaching hardware. Fits Quicksilver 270 and larger Sport and Heavy Duty models. |
 |
| A. Cross-Bar Rack Steering Kit |
| This adjustable-width, aluminium tube cross-bar steering unit attaches to the lacing cuffs on top of tube. Includes cross-bar frame, 33sm steering wheel, bezel, rack helm, steering cable and attaching hardware (four thumb screws, wing nuts and two backing plates). Does not include control box, shift and throttle cables or attaching kits for engine. |
|
|
| B. Lacing Cuff |
| Black |
| Silver |
| 46cm lacing cuff for use with Cross-Bar Steering (two required) |
 |
| C. Inflatable Bench Seat |
| Inflatable bench seat with back. Grey colour. Fits Quicksilver Series 270, 300, 310, 330 and 340 inflatables |
